[E152P] Motor Minimum Power

Created by Patrik Neuendorf, Modified on Wed, 9 Oct at 1:50 PM by Patrik Neuendorf

[E152P] Motor Minimum Power: The motor needs a minimum of power in order to just rotate without any load. This power is set by [E152P] Motor Minimum Power.

If [E152P] is set too low:
- The motor will not reach the set motor speed due to lack of power.
- Some noise is produced, which is all right but might sound strange.
- The motor is weak, especially when DRAG is low.
- Very low value will totally stop the motor from rotating with just the noise.
if [E152P] is too high.
- The motor will be too strong, especially on lower DRAG settings.
- Clutch will slipp.
- Motor does not stall as it should to prevent power loss.

Adjusting the value:

A way to find a sutible value for [E152P] is to start the motor with full speed and 0 DRAG and decreise [E152P] untill the noise starts, and motor speed drops, and then step up a few persent. Factory set is 10%.

Note! [E152P] does not affect the maximum power in the Ex.