Hooking zone

Created by Patrik Neuendorf, Modified on Wed, 06 Dec 2023 at 11:51 AM by Patrik Neuendorf

In firmare.

From main picture (LINE OUT) press Enter button for the E menu and the buttons under display (1-6) to navigate in the E menu.
To set the Hooking zone length navigate to E653.
To set Motor speed in Hooking zone navigate to E154.
If you want the motor to lock the wheel you have to user PAUSE MODE. Navigate to E445 and choose "Enable"
If the lock torque is to weak, press P button in menu E445 and set "Force" to 30%. Don't go higher when then 50% when it might damage the electronic if the motor current goes too high.

If the E445P does not show, but it returns to the E44 menu, you must enable a higher level of display details. This is made in E654. Choose "Extended"