Firmare 1.2502-BL3

Created by Patrik Neuendorf, Modified on Wed, 15 Jan at 10:29 AM by Patrik Neuendorf

News and changes in the firmware 1.2502.

Machine overvoltage protection. Software protection for the MEX card that will disconnecet the wheel from motor when internal voltage reaches maximum level.
Improved and faster network communication.
RC4 works much better due to the new network protocol.
RC4 can start an Ex motor to run above surface (Line out 000).
Blocking of external push-button commands when machine shows a Group picture now makes 3 fast beeps in the sounder. As an alert.
Firmware update is faster. 80 seconds for complete upgrade.
Motor/Wheel lock also now in Automatic mode.
Catch detection when line pulls out in all fishing programs.
Catch detection when line pulls out also when motor is paused in Automatic mode.
Improved calculation for the paramter Weight. Configurable to use combinations of not only Motor current, but also Motor speed and Wheel speed.
Improved Catch detection on motor load (Weight) due to the improved Weight calculation.
Multilanguage reset menu now shows 9 prioritized values to step through as a first time setup.
Humidity warning alarm with adjustable level (100% = Disabled)
Sub menu for INFO [62] to avoid too many presses on P-button.
Sub menu for CATCH [E3] menu with the follwing categorizes.
- UP [E31]: Catch settings when runs.
- DOWN [E32] : Catch down and Catch if wheel roles backwards.
- SHOW [E33] : LED and Display notification settings when catch registration occur.
- RESTART [E34] : Restart time after catch is hauled up.
Improved Line-mess function to prevent slack line:
- This function has always had a small range for detection of the motor load because of using the motor current. Now it uses the new calculated Weight value.
- Line-mess has been inactivated from when motor starts for a distance to wait untill the line has no slack. Now it is replaced with a delay time (2 seconds is factory value).
  This delay time also replaces the old 2 seconds fixed delay at motor start before Catch detection can be made, and is therefore now adjustible.
CATCH [E32] Catch detection - Time down is now available in Trolling program.
A lot of menu texts has been corrected / changed.
Improved Theif code encryption